Home grown pump tester w/ specs....

[HORNMAN]

Well I did it. I made a tester to pressure check the rear cone on the pump. 4 stops, 30 bucks and viola. The black hose is a grease gun extension, 3 bucks @ Harber Freight, brass fittings from Home Depot, 17 bucks and the gauge & shrader valve from a local hardware store, 10 bucks. ( I had the anodized cap to show detail from my ATV). I utilize an old Mtn bike hand pump to juice it, 10 lbs is easy to achieve. Pressure checked the device, 1 LB loss in 13 hrs... not bad.Attached is a pic of the finished product... feel free to duplicate, glad I could be of assistance to someone. MH :cheers:

 

[Dr Honda]

Thanks for the pics, and description. :cheers:

I know you were asking about it... but other than that link I gave you... I don't think there was much info on it.

 

[HORNMAN]

Thanks for the pics, and description. :cheers:

I know you were asking about it... but other than that link I gave you... I don't think there was much info on it.

No worries... glad to be of help to fellow enthusiests (spelling cops stand down pleez)