Help! 93 sp no click no start

[Monkeyman8603]

So it ran fine then next day nothing. Push start button nothing. Jump solenoid it cranks. Replaced solenoid, push start button... nothing. Swap mpem with working one(which has its own kill switch, start button, and positive lead) still nothing. Pulled starter and tested good. Cleaned all contacts. Used positive lead from starter to battery started and ran. I’m at a loss. Any suggestions or things I missed? [emoji35]

 

[racerxxx]

Did you check the lanyard switch and start button for continuity?

 

[Monkeyman8603]

Yup. Like I said I took it off a working sp. everything worked on that one. Swapped and the broke one is still doing the same thing.