Front Nose Cone Replacement 2011-13

[PeterC4]

Anyone replace the vinyl nose cone on a newer Seadoo? I think the new ones are attached via three hex bolts, not rivets like the old ones, but I am unsure.

 

[PeterC4]

Installing the front bumper on a 2013 Wake Pro

It has 5 10mm hex bolts - easy to remove. Three bolts under the hull and one on each side behind the caps. To install, push the bumper tight to the hull and install the front ones first. Then the sides. Make sure you don't lose the caps in the water. The hex bolts are aluminum with an integrated washer. If you banged into something...assume the screws could be bent so order some new ones to be safe.