• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Fram g2 right before fuel rail? 09 rxpx

Status
Not open for further replies.

ricardo1

Active Member
I got my injectors rebuild and one was found to be clogged, took all the gas out, replaced with new gas but I was looking to add an inline filter before the fuel rails so I came across all the fram g2 filters but its all with 2 stroke machine nothing about the newer 4 tec engine so my question is would I run into issues with installing one right before the rail?
 
No need and shouldn't on a fuel injected fuel system, the fuel pressure is to high. There should be a screen on the bottom of the pump.
 
No need and shouldn't on a fuel injected fuel system, the fuel pressure is to high. There should be a screen on the bottom of the pump.

That's what I thought, I have heard of some people using the billet ones before the filter and I like the idea of just little extra insurance but they are from riva and cost 105.
 
Status
Not open for further replies.
Back
Top