fly wheel remove

[stevieTypeR]

can any1 give me sum advise on removing my fly wheel have the big nut of and flywheel remover on but it wont budge is there anything esle i have our can do

 

[jdsupera]

I just did it an hour ago. Go to autozone or whatever close. I bougt my set but you can rent them also. Get a 3 pronge puller. The kitI bought had all various size bolts and only cost 16.00. Leave the big nut off and put the puller set on and only incert the bolt about a 1/4 inch into the flywheel and start wrenching it until it pops off. Its actually pretty simple with the puller. Mine was pretty hard to turn as well until it popped loose.

 

[mramccm]

flywheel removal

can any1 give me sum advise on removing my fly wheel have the big nut of and flywheel remover on but it wont budge is there anything esle i have our can do

Some of these have benn on for 10 to 15 years so they can be stuburn. Big breaker bar and sturdy puller. When it comes it will be with a bang. I cought mine about 10 inches in front of the engine when it finaly popped loose.