FlyinFred
Member
I have a 1998 Seadoo XP limited.
Discovered that the plastic thru Hull fitting (picture1 and 2) looks a bit rough. In my google searches I came across the item in picture 3. Is this something I should epoxy in or is there something else I should be looking at?
I’m replacing quite a few parts in the drive line that is how I discovered the plastic piece.
Thank you.
Discovered that the plastic thru Hull fitting (picture1 and 2) looks a bit rough. In my google searches I came across the item in picture 3. Is this something I should epoxy in or is there something else I should be looking at?
I’m replacing quite a few parts in the drive line that is how I discovered the plastic piece.
Thank you.
