Burning fuse 5A mpem GTI-00

[pumme]

Burning fuse 5A mpem GTI-00 (Problem solved)

Hello everybody!
Has someone took apart a MPEM controller to a seadoo? I do not want to spoil anything but it is embedded in a rubber-like mass and before I move on someone may have any tips? I have allready located the position of the diode on the card from another mpem foto.
Is there someone here ho knows where I can buy over the internet the Motorola MR2535L Diode that cases me trouble? :ack:
It seems hard to find in Sweden.

Best regards Pumme / Stockholm / Sweden.
Seadoo GTI -00

 

[All Things Custom]

Yes, This is a repair I do....

if You can find them they are expensive and require that you purchase them 1000 at a time. I have some here,

contact me by pm ....

mike

 

[All Things Custom]

Yes, This is a repair I do....

That Motorolla part no longer exists. if You can find them they are expensive and require that you purchase them 1000 at a time. I have some here, that I stocked up on prior to their demise.

If you have one needing repair let me know.

contact me by pm ....

mike

 

[pumme]

is there anybody how knows how to get inside and separate the mpems rubberfilling from the plastic shell without breaking the bord shuld i heat it or cool it? knife? hammer?:banghead: ha ha ha exuse me if i writes wrong im from the same contry as the chef in the muppet show.....
//Pumme

 

[All Things Custom]

Yes, leave it to the professionals....

Send it to me and be back on the water in no time at a fraction of the cost.
:cheers:

 

[pumme]

Problem solved with 5amp fuse burning MPEM

Now I have left it to the professionals......myself of course.....
Part bought from the States and tonight I dismantled the MPEM and replaced the broken diode.
Now it runs like never before:hurray:
Best regards from sweden
//Pumme.