BOMBARDIER/SEADOO Utopia 185 Mercury v6 240EF Cooling System Problems

[JETMOTO]

Hello , i have the issuse with my UTOPIA 185 with MERCURY V6 2STROKE 240EFI , When i connect a water to engine flushing hose , the engine not cooling , the water staying in down engine , notcoming to powerheads ant exhnaust . I know when u siwtch on a water hes must leak from exhnaust and must come to powerheads ,but water not coming out.. I didit can a flush a engine because a engine getting a overheating in 1 minutes. Why the water not circuiting around a engine? Water coming out only from water pump.

 

[ripcuda]

Hi. There is a cross-over hose between the two heads at their tops (hard to see in your pic). And the port/left head connector has a second hose connected that goes to the tell-tale spout (pisser) on the boat hull. These thru-hull spouts often get clogged by bugs. This hose must be clear. Blow some compressed air into the spout to ensure it is not clogged. When running on-the-hose or in the water, this hose lets air escape the heads while they fill up with water... and then will stream out water showing proper cooling flow.

 

[JETMOTO]

i check this what u say , and the hoses not stucked...

 

[JETMOTO]

Hi. There is a cross-over hose between the two heads at their tops (hard to see in your pic). And the port/left head connector has a second hose connected that goes to the tell-tale spout (pisser) on the boat hull. These thru-hull spouts often get clogged by bugs. This hose must be clear. Blow some compressed air into the spout to ensure it is not clogged. When running on-the-hose or in the water, this hose lets air escape the heads while they fill up with water... and then will stream out water showing proper cooling flow.

Meybe u have some thgings more?