Took out the '92 seadoo for the first time and after a 30 minute ride, it would stall randomly. It would start back up after a few cranks. It did it 3 times, so I went back to the ramp. It idled back perfectly fine. Took the plugs out at home and found a c
arbon baked on the spark plug on the PTO side. (I rebuilt that cylinder). The MAG side is running rich too, but not as bad. What seems to be the problem? They were new spark plugs. I just realized I didn't check the gap but they currently are 0.028. Was that my problem and what carb adjustments can I do
arbon baked on the spark plug on the PTO side. (I rebuilt that cylinder). The MAG side is running rich too, but not as bad. What seems to be the problem? They were new spark plugs. I just realized I didn't check the gap but they currently are 0.028. Was that my problem and what carb adjustments can I do