Arctic Camo SeaDoo 2 Stroke: DIY $30 upgrade

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

JustSteve

New Member
I was looking for something unique to freshen up the looks of this $100 backyard find. The plan was to use vinyl automotive wrap but I had some cheap vinyl on-hand so I just went for it. It turned out so good that I repeated the process on another 2 seater and filmed the entire process this time.

Title says $30 graphics but I only used about 2/3 of the vinyl I purchased.

Here's the video:

[video=youtube;iWxL7-JQiH0]https://www.youtube.com/watch?v=iWxL7-JQiH0[/video]
 
Last edited by a moderator:
Great video!
A MUST WATCH!
It turned out awesome!
I love the work ethic.
Not afraid to put a few hours into the machine to make it look great [emoji1417]
Not too shabby!!!!
 
Thanks for the kind comments. This forum has helped me out of a few pinches over the years. Just wanted to give a little back.
 
I was looking for something unique to freshen up the looks of this $100 backyard find. The plan was to use vinyl automotive wrap but I had some cheap vinyl on-hand so I just went for it. It turned out so good that I repeated the process on another 2 seater and filmed the entire process this time.

Title says $30 graphics but I only used about 2/3 of the vinyl I purchased.

Here's the video:

https://www.youtube.com/watch?v=iWxL7-JQiH0

Nice job Steve. I enjoyed the video.
 
How to: Make your own carbon fiber look vinyl center console.

Here's another video I put together today. Not quite as dramatic, but it's another quick and inexpensive project that can make your center console look a bit more modern. [video=youtube_share;1Ok5r1h_6r4]https://youtu.be/1Ok5r1h_6r4[/video]
 
Status
Not open for further replies.
Back
Top