• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

alignment on a '99 challenger

Status
Not open for further replies.

treyk03

New Member
I have a '99 Challenger with dual motors. Im getting it all ready for this summer. Last year before i put it up for winter, It would drift to the right allot. I had my stearing wheel at 10 O' clock the whole time just to get it ride in a straight line. can anyone help me with this problem??? :confused:
 
At the steering nozzle, you'll see the cable, in which "crack" the jam nut, then undo the 10mm nut underneath, lift the fitting from the nozzle and turn it out a few turns, then jam-nut it, set it back into the nozzle, and you should be good
 
Status
Not open for further replies.
Back
Top