Accelerator pump fuel line problem

[smaguire93]

Hey folks. Hoping for some guidance.
2000 seadoo gti 720

one of the little pipes going to the accelerator pump has ripped just where it attaches to the carb.

my issue is there’s a little restrictor in that pipe. It’s too close to where the pipe broke (around 5mm from end of pipe) this prevents me simply pushing the pipe back on. Well I can push it on slightly but it’s not going to hold.

I suppose I am wondering can I simply replace this pipe with a similar size (no restrictor)

Or anyone got any suggestions?

 

[mikidymac]

You have to use the restrictor.
Cut the restrictor out and get some 3/32" tygon fuel line to replace the broken one. You can find it at mower shops and home depot.

 

[smaguire93]

Then is it just a case of pushing the restrictor into the fuel line?

Thanks for the advice

 

[mikidymac]

Then is it just a case of pushing the restrictor into the fuel line?

Thanks for the advice

Yes, that is correct.