Alaskastreamin
New Member
Hi guys.
I've read every post about the no start issues with these and tried everything.
Got this from a friend who ran it in his driveway then took to the ramp and dead!!
Here's what I know now.
Battery 12.5 volts
All fuses good.
Plug DESS in and two beeps.
VTS works/ gauge moves.
Pull DESS VTS works for 25 seconds.
Pull DESS, push start/ stop 5 times. Get one short and one long tone.
Good ground to stator cover.
Cross starter solenoid, motor turns over. (no spark)
Tried start/ stop then DESS to reset MPEM.
No power coming out of MPEM on yellow/ red to solenoid. ( pin #13 in plug #3)
All the beeps say it's good to go on MPEM.
Harness has no corrosion in pin connectors.
Ron Pratt
Sitka Alaska
I've read every post about the no start issues with these and tried everything.
Got this from a friend who ran it in his driveway then took to the ramp and dead!!
Here's what I know now.
Battery 12.5 volts
All fuses good.
Plug DESS in and two beeps.
VTS works/ gauge moves.
Pull DESS VTS works for 25 seconds.
Pull DESS, push start/ stop 5 times. Get one short and one long tone.
Good ground to stator cover.
Cross starter solenoid, motor turns over. (no spark)
Tried start/ stop then DESS to reset MPEM.
No power coming out of MPEM on yellow/ red to solenoid. ( pin #13 in plug #3)
All the beeps say it's good to go on MPEM.
Harness has no corrosion in pin connectors.
Ron Pratt
Sitka Alaska
Last edited by a moderator: