98 Speedster windscreen snapped at hinges

[sandshark]

...on the inside, last season. Epoxy fix (basically a union from plastic around the metal of the hinge) worked for the rest of the season. Now I am rolling to Big Bear for the holiday next weekend, boat checks out A+, but I noticed the epoxy went soft. I am considering just cutting away the old and redoing same/same - Suggestions? Your experience? Also considering a drill-through with some (say three each windshield) stainless bolts and washers, but if I crack the screens they are done.

Whaddaya think, guys?

Thanks, and lets have a great summer.

Sandshark

 

[sandshark]

I guess this must be a really tough question...



Going with Marine JB Weld, we shall see!
Thankfully the hinges are on the inside, this won't be pretty.

Sandshark

 

[schellski]

How did the JD weld work out? Or was epoxy a better plan?

TY

 

[catesj]

speedster windshield fix

Any luck with the Speedster windshield fix?? I've got a 98 with the same problem.....thinking about drilling through the plastic windshield and SS hinge and putting a small piece of polished ss plate on the outside and bolting it through to the inside hinge.
Mine isn't broke right off yet, but I can see the small cracks starting to form on the under side of the windshield.