TomShadow
Member
Hi there newbie here! Bought a non running GSX limited. Charged the battery and connected it up. Push start button and engaged the key, got the 2 beeps trys to start but then the display goes off. Tried it a few times and the display would come on and off but would try to start. I did eventually get it go but then it would cut out and the display is off.
Had a look around tried it a little later on and it wouldn't start at all. Same thing would try to turn over but before it does one cycle it cuts out. It's also displaying 12v low but that disappears and then goes back to normal. I've check the battery and thats 12.7v I know its losing power as the clock keeps resetting its self after an attempted
I'm guessing its a wiring or start button issue but have little knowledge of these machines.
Where shoud I start looking?
Thanks in advance
Tom
Had a look around tried it a little later on and it wouldn't start at all. Same thing would try to turn over but before it does one cycle it cuts out. It's also displaying 12v low but that disappears and then goes back to normal. I've check the battery and thats 12.7v I know its losing power as the clock keeps resetting its self after an attempted
I'm guessing its a wiring or start button issue but have little knowledge of these machines.
Where shoud I start looking?
Thanks in advance
Tom