97 Speedster Scupper Valve

[ollieman80]

My dealer told me this is "no longer available" from Sea Doo. Where else can I find a scupper valve? Can they be repaired? I do not have mine out yet (next week) but I am pretty sure it is bad.
Thanks for any help!

Ollieman80

 

[Dr Honda]

SeaDoo didn't make 80% of the parts on your boat. The scupper valve is a generic unit. Go to your local boat shop... and they can get you what you need.

I don't remember the size off the top of me head... but I ordered one from ebay for $7 shipped... so at your local boat shop... it should still be less than $15.

 

[YUOnDaGround]

http://www.westmarine.com/1/1/497-flow-max-ball-scupper.html

This is the one I got and it works great. Just make sure you get the one with the correct diameter.

 

[illru]

This is what I did.
Seadoo Part Number 204060188 (It was 35 bucks from seadoo... you can find it cheaper)
Reuse old outer ring (Scupper Clamp)
Buy longer stainless screws (#8 x 3/4'') from Home Depot.
Sandwich outer ring between boat and new scupper.
Enjoy dry feet!

 

[mrclean667]

I ordered the same one from westmarine and it works great on my 96 challenger!!

 

[the big e]

http://cgi.ebay.ca/Small-Self-Baili...at_Parts_Accessories_Gear&hash=item1c05df514b

 

[cli55er]

academy sells an asortment scupper valve set of different sizes, but i dont know if any of them in the package would fit. worth a try.

 

[ollieman80]

Thanks to all that replied! I ended up getting a scupper valve from greatlakesskipper.com and it was a perfect fit. After changing that, a leaking exhaust gasket, checking the impellar clearances, doing a compression check, and changing the cone oil I am once again enjoying dry feet!
Thanks Again,
Ollieman80