Title says it but some history.
Bought this ski years ago, used it a season or two with no problems.
Then a couple years ago start having this problem where it intermittently won't crank. Seems that when you jiggle the wires on the rear E box it would then kick over and run. Dealt with that for a season, then when I winterized it I pulled all the connections apart in that box, cleaned them, reassembled.
That problem stopped happening and good times were had by all.
Fast forward to this season, I ran the thing in my driveway, prepped it, no problems. Go to launch, no crank. Drive it back, remember the old issue, jiggle the wire harness and it cranks. Take it back to the launch and it cranks but won't start. Drive it back and now I have no spark.
So at this point it was cranking w/ no spark. I ordered an ignition coil and a starter solenoid. Changed the coil and after that it doesn't crank. Changed the starter solenoid and it still doesn't crank.
I checked the yellow/red wire and 12v is going to the solenoid trigger but it doesn't click.
I kind of scratching my head here because it was cranking with the old solenoid, then after I changed the coil it won't crank at all with either.
Anyone experienced something like this? I'm kind of stumped.
Bought this ski years ago, used it a season or two with no problems.
Then a couple years ago start having this problem where it intermittently won't crank. Seems that when you jiggle the wires on the rear E box it would then kick over and run. Dealt with that for a season, then when I winterized it I pulled all the connections apart in that box, cleaned them, reassembled.
That problem stopped happening and good times were had by all.
Fast forward to this season, I ran the thing in my driveway, prepped it, no problems. Go to launch, no crank. Drive it back, remember the old issue, jiggle the wire harness and it cranks. Take it back to the launch and it cranks but won't start. Drive it back and now I have no spark.
So at this point it was cranking w/ no spark. I ordered an ignition coil and a starter solenoid. Changed the coil and after that it doesn't crank. Changed the starter solenoid and it still doesn't crank.
I checked the yellow/red wire and 12v is going to the solenoid trigger but it doesn't click.
I kind of scratching my head here because it was cranking with the old solenoid, then after I changed the coil it won't crank at all with either.
Anyone experienced something like this? I'm kind of stumped.