• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

96 xp what to do with a small leak in the exhaust right above the mag plug?

Status
Not open for further replies.

Saludadoo

Active Member
Noticed a leak peeing out and i think it was causing a mis in the engine
I put a rag to keep water from the plug
Can i just use epoxy?
 
You can to get thru, or have new ones welded on. I make them if your interested. They're $5 each and $7.50 to ship priority mail. I know it's pricy shipping but I've lost enough in the mail that the post office won't reimburse me for do priority shipping it is. I just had 3 pipes done, 2 on my speedster and one full pipe for inventory, lol.

https://www.seadooforum.com/index.php?posts/438493
 
Last edited:
Ok will try epoxy for now to get me thru the season.
Has anyone tried the low temp aluminum rod to repair?
mine doesn't look corroded
Can the gaskets be reused or just buy a new one?
Thanks for the help.
 
i would take the pipe off and bring it to a local welder and they will fix it. lots of people will tell you epoxy works but you are much better off having someone weld it for you
 
If it's leaking it's corroded. There are 4 plugs total. The bottom 2 are notorious for rotting out. The water lays in them constantly. It's just a pin hole, but it's corroded itself all the way thru.
 
Status
Not open for further replies.
Back
Top