'96 seadoo spx water line question

[The_Doctor]

Hey guys. Im new to the whole seadoo thing so please bare with me. My spx has the flush "T" on the right side water hose (when looking at it from the rear of the ski). From what ive read, that is the outlet? Just wanted to make sure its on the correct hose and that i can safely run it out of the water for winterizing in a couple weeks.
Ive read so many different things and i know other engines are done differently.
Any bit of help would be great....thanks guys.

 

[mikidymac]

Yes, that is correct. You are actually back flushing the engine to get out all the sand and crap too.

You do have to pinch the hose towards the back side of the tee so the water goes to the engine instead of out the back of the ski.

 

[The_Doctor]

Okay great. Thanks a lot! And ya, i have to clamp after the "T" so it forces it through the engine.
Do i need to do anything with the inlet line or is that okay to leave alone?

 

[mikidymac]

No, the inlet stays as is.