• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

96 bombardier SPI not getting fuel

Status
Not open for further replies.

keith c.

New Member
For some reason I can't get gas to the fuel filter that sits above the gas and oil tanks?????
Is there a fuel pump that I can't find? I have just changed the fuel lines from the original grey lines. Is the pick up baffle/fuel sensor maybe bad????
 
Make sure of your connections. It is easy to get them swapped while replacing the fuel lines. Also, did you clean/replace the fuel selector switch?
 
First of all, thanks for your help!!! I triple checked the fuel lines for the correct positions, but I have not cleaned the separator yet. I will give that a shot. Even when I pull the lines from the back of the separator I still can't get any gas to come thru any of those lines. Its like where's the pressure come from to push the gas thru the lines???
 
For sure clean the separater, but make sure to clean the selector switch. Move the selector to reserve and see how it does.

These are not pressurized systems. It has a fuel pump, so unless the engine is cranking, you may not get any fuel through the lines.
 
Status
Not open for further replies.
Back
Top