• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

951 premix modification

Status
Not open for further replies.

stevethegas

New Member
just bought a 98 gtx limited that has been converted to premix but the oil light is flashing all the time due to there being no oil in the redundant tank is there any way to make it go out ?
 
I'm sure there is, but I just let mine flash. It don't hurt anything and I'm scared if I mess it up then maybe the other Tuff won't work like battery or overheating light.
 
Oh oh...:( is there still an oil feed going to the other engine parts that get their lubrication from the oil tank as well as premix to the carbs?

Look for some 1/8" size lines/nipples on the lower part of the engine and the rave vales I think to see that they are still getting oil.

Ray
 
Oh oh...:( is there still an oil feed going to the other engine parts that get their lubrication from the oil tank as well as premix to the carbs?

Look for some 1/8" size lines/nipples on the lower part of the engine and the rave vales I think to see that they are still getting oil.

Ray

been told by the guy who rebuilt engine the 951 has a sump with oil in it so no need for that
 
That's correct I u want the oil light to go out just connect the wires together that went to oil sensor an the light will go out
 
Status
Not open for further replies.
Back
Top