• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

92 XP no start, crank, nothing

Status
Not open for further replies.

rsmelt40

New Member
HEY HEY HEY

Got the new crankshaft in the block, motor in the DOO, and nothing when I hit the start switch...checked the switches, each of the three act right. Will motor over when the large terminals on the solenoid are shorted together. Looked at a wiring diagram at
http://216.37.204.206/xtremepowersports/Seadoo_oem/Seadoo_PWC.asp?Type=13&A=8&B=8
and saw several differences in their wiring and mine on the ski, but the thing ran last season until the rod bearing seized...is there a more accurate wiring schematic for me to troubleshoot with?

Also, as far as the exact year, I had to guess because the ID tag is not on the rear of the ski

Please help with this elusive no power problem.

Thanks,
Scott
 
locate the relay. The little red wire needs to be on the relay post, that the battery cable is on.
 
Status
Not open for further replies.
Back
Top