610Mike
Member
96 GSX w/ 787
Rebuilt the carbs (genuine mikuni) and changed the grey lines
Ran great about 10 hours
Started stumbling around 4500/5000 rpm ... did not replace fuel selector switch when doing gas lines, but suspecting that may be the issue, I switched the fuel selector switch to reserve and it straightened out for about 10 mins.
Was running wide open and died. Could not restart - turned over but never started
While trying to restart noticed 12v low was flashing - has not done that previously.
With ski off, attach key, two chirps...no 12v low. Press starter button and ski turns over, but does not start. 12v low begins flashing.
Battery checks out. Recently cleaned connections.
Before I start chasing fuel delivery issues, what am I missing with the 12v low flashing?
Rebuilt the carbs (genuine mikuni) and changed the grey lines
Ran great about 10 hours
Started stumbling around 4500/5000 rpm ... did not replace fuel selector switch when doing gas lines, but suspecting that may be the issue, I switched the fuel selector switch to reserve and it straightened out for about 10 mins.
Was running wide open and died. Could not restart - turned over but never started
While trying to restart noticed 12v low was flashing - has not done that previously.
With ski off, attach key, two chirps...no 12v low. Press starter button and ski turns over, but does not start. 12v low begins flashing.
Battery checks out. Recently cleaned connections.
Before I start chasing fuel delivery issues, what am I missing with the 12v low flashing?