587 crankshaft bearing removal

[Paul2112]

Is the standard bearing seperator w/puller used to remove these two bearings? Thanks everyone.

 

[mikidymac]

Are you only replacing the outer bearings? And if so why?

 

[Paul2112]

Are you only replacing the outer bearings? And if so why?

Doing a complete engine rebuild,,,, the two bearing were going out.... had to use a heavy duty seperator and press,,,,,damn they were stuck on

 

[mikidymac]

IF your outer bearings are bad there is a 99.9999% the rod bearings and inner bearings and seals are going too. You can't replace them at home. You need to buy a reman crank.