2020 Seadoo Fish Pro Transducer Location.

[Larrymeador]

Does anyone know where it's located. I'm not getting a depth or sonar signal.

 

[tommyv333]

Does anyone know where it's located. I'm not getting a depth or sonar signal.

Have you found the location? I just purchased a 2021 fish pro and it tells me that the transducer is not connected. Id like to investigate rather bringing it to the dealer

 

[Larrymeador]

Have you found the location? I just purchased a 2021 fish pro and it tells me that the transducer is not connected. Id like to investigate rather bringing it to the dealer

Yes, it is located in the rear under the back deck. You have to take a few screws out to get to it but it’s easy. If it is saying it’s not connected most likely you have to reach behind it and push the two plugs in good. The GPS base doesn’t hold the two plugs very tight and sometimes when you put the gps in the cradle it pushes the pins out the back.

 

[tommyv333]

Thanks for the location! I did find the problem. There is a 4 pin plug connector at the coolant tank under the seat. Upon inspection I heard a spark arc. The wire from the transducer 1” from the plug had a slice across it severing 3 of the 4 wires. I took it to the dealer and they ordered a new transducer. I told him that I am going to solder and shrink tube the cut wires so I can play with the sonar this weekend. I will have them install the new one in 2 weeks when they wrap it for the winter.