• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2007 RXT 215 - No beep when tether installed, but have guages

Status
Not open for further replies.
I'm having trouble with a 2007 RXT 215. When I connect the tether, the gauges come on, but I do not hear the buzzer nor do I hear the fuel pump kick on. Nothing happens when I hit the stater button either. I have checked all the fuzzes and connections and can't locate anything wrong. I have had two good batteries in it, with the same results.

Any ideas where to look next? maybe main power Tyco relay or TOPS issue? I am only reading 5-6 volts across the relay, but 12.8v at the posts (battery and going into the small relay / fuse box with the two 30 amp fuses).

Thanks!
 
Status
Not open for further replies.
Back
Top