• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2007 GTI Gauges not working and blowing 3 amp fuse

Status
Not open for further replies.

JohnCiccarelli

New Member
I just bought a 2007 GTI and the Gauges are not working. I noticed that the 3 amp Gauge Fuse was blown and blows again when replaced. I am assuming that it is a bad Gauge Cluster. Is there anything else it could be?
 
i bought an 05 4tec and the guages were bad aswell. if it keeps blowing the fuse its definately a short in the guages. mine had the same problem the guages were working for rpm and mph but the lcd was burnt out and would cause a short . hope this helps
 
Status
Not open for further replies.
Back
Top