I currently have a 2006 seadoo rxp, it recently dropped a vavle so I rebuilt the motor this is what it has
Built motor
629 Camshaft
Bkit
60IB Injectors
Riva 3" Intake
Rive Whole Through Exhaust
Now what is happening and I would like some advice on it is that the fuel keeps mixing with the oil... it used to have a riva racing fuel pressure regulator - @ WOT it was running 10.5 AFR's which was way to rich so I started going throught the ski to find out why it was running 10.5 mixers it had a aftermarket fuel pump so I ordered a standard seadoo one installed it and now the AFR's [MENTION=37162]WOT[/MENTION] are around the 11.2 mark but it is still mixing fuel with oil just not as bad
are these mixers still too rich? if so what else could cause this?
Built motor
629 Camshaft
Bkit
60IB Injectors
Riva 3" Intake
Rive Whole Through Exhaust
Now what is happening and I would like some advice on it is that the fuel keeps mixing with the oil... it used to have a riva racing fuel pressure regulator - @ WOT it was running 10.5 AFR's which was way to rich so I started going throught the ski to find out why it was running 10.5 mixers it had a aftermarket fuel pump so I ordered a standard seadoo one installed it and now the AFR's [MENTION=37162]WOT[/MENTION] are around the 11.2 mark but it is still mixing fuel with oil just not as bad
are these mixers still too rich? if so what else could cause this?