Mdanieltech
New Member
New Boat Owner (Mechanical/Engine Question)
2005 Sea-Doo Sportster LE
I tested the boat prior to buying, worked good no issues
Took it to a Authorized Sea-Doo repair shop to give it a once over prior to going out.
They did the following
1) Change the Spark Plugs
2) Replace the Water lines because of a small leak
3) Reroute electrical because of potential burning of the wires
4) Tested compression 125/125
Nothing found
Went out today, ran great until our way in where the following happened
Coming in to the launch I lowered the speed and stalled out I couldn't get a slow/idle roll in without a stalling.
I finally was able to make it in and get out of the lake
Any possible ideas before heading in to a shop?
2005 Sea-Doo Sportster LE
I tested the boat prior to buying, worked good no issues
Took it to a Authorized Sea-Doo repair shop to give it a once over prior to going out.
They did the following
1) Change the Spark Plugs
2) Replace the Water lines because of a small leak
3) Reroute electrical because of potential burning of the wires
4) Tested compression 125/125
Nothing found
Went out today, ran great until our way in where the following happened
Coming in to the launch I lowered the speed and stalled out I couldn't get a slow/idle roll in without a stalling.
I finally was able to make it in and get out of the lake
Any possible ideas before heading in to a shop?
