from idle to mid range is fine, then push the flipper and nothing, sputters loses power til I return it to mid throttle then runs fine again. Its no fun to ride at 25mph. I saw a old post from 2 years ago same problems but no solution. its at the dealers they cant find a problem on the trailer. Anybody have the problem or fix? Thanks
2005 3d rfi hesitation and bogging
- Thread starter ffchewy
- Start date
- Status
Have you serviced the fuel system, checked the fuel pressure, changed the fuel filters on the fuel pump in the tank?
LOTS of info in this tread on where to begin. RFI's can be tricky. Could be a throttle position sensor. A candoo might be in your future. So do as much as you can without one and post your questions as you go along.
http://www.seadooforum.com/showthread.php?50814-The-RFI-(Rotax-Fuel-Injection-)-Spot&
LOTS of info in this tread on where to begin. RFI's can be tricky. Could be a throttle position sensor. A candoo might be in your future. So do as much as you can without one and post your questions as you go along.
http://www.seadooforum.com/showthread.php?50814-The-RFI-(Rotax-Fuel-Injection-)-Spot&
its still at the shop. they gave up. said it could be the crank seals letting too much oil by, because its smoking alot. It did fill the motor with oil over the winter. The compression was good and fuel pressure was good. when I get it home I will take the pump out clean and check it out and post my findings. Thanks
- Status
Similar threads
- Locked
