• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2004 Seadoo gtx limited instrument gauges

Status
Not open for further replies.

Northy185

Active Member
Hi guys I need some help. I’ve got a 2004 gtx that I love even though it’s been a right bitch since I’ve owned it. Aside from destroying a piston and having to rebuild it then 10 hours later dropping all its oil in the hull (faulty jubilee clip) and then spinning a shell I have got it back together and is now running great. But now the gauges have stopped working due to damp getting in them. I’ve looked everywhere for a good set but have drawn a blank. Does anyone have a set I can buy or can point me in the right direction. I’ve tried all the breakers I know thanks.
 
Gauge is a pretty basic 1 + and 1 - wire to power up, rest of the wires feed info but just +/- will cycle it. Download the manual for an 04 and find the 2 power wires. Check for 12V when DESS installed, if it's there then cluster is issue, if not, chase it back until you find the open wire.
 
Status
Not open for further replies.
Back
Top