2004 SeaDoo GTI LE flywheel and drive shaft

[Beeperd]

Bought a used GTI LE last fall and rode it for a few hours with no problems. Stopped to talk with my brother, restarted and gave it some gas to get going again. The engine revved up but the SeaDoo did not move. It wound down, shut off and would not immediately restart. Got it restarted a bit later and it still would not move. It got cold shortly afterwards, so I winterized it and let it sit. Just started looking at it again and noticed that when I turn the flywheel, the drive shaft does not move. I also noticed that the grease fitting is missing from the flywheel. I can turn the impeller with no problem. Any suggestions on how to address this? Does the missing grease fitting act as a key and lock the drive shaft in place or something else?

Thanks!

 

[mikidymac]

Nope. Sounds like you have a stripped driveshaft and PTO flywheel.

 

[Minnetonka4me]

I'd agree, and maybe a locked up pump as well. Get it apart and text me at 6127439311, I've got all the parts to fix it.

 

[mikidymac]

Minnetonka is the best for guaranteed used parts.

 

[Beeperd]

Nope. Sounds like you have a stripped driveshaft and PTO flywheel.

Thanks. Makes sense. Was hoping for a cheap fix, but...