DonGrayson
New Member
Ok, it goes like this. Ski started and ran first time in water this season, but was not hitting on all cylinders. Removed front plug and grounded to check for spark. There was no fire, and when plug was put back and wire back on, tried it again, but now don't get the normal series of beeps. Showed a 1656 error code. Then while attempting to find what caused that code, it now just sits and a large relay (unsure what it is) opens and closes, but no display or beeps at all now. Obviously I'm not familiar with these mechanics, but was just hoping someone could offer some advice. DESS "seems" to be ok. Wires all check ok. Fuses all check ok.
Thank you in advance for your assistance.
Don
Thank you in advance for your assistance.
Don
