2000 sea doo bombardier gti

[tryku23]

heyy . I'm new to this whole thing. I bought my pwc 2 weeks ago. it's in very good condition everything works fine but 2 days ago I was ridin it in low tide and few time it was very shallow and I got stuck in a mud. after I took it out I flushed it . but I've noticed that in the back of the jetski there is a small pipe that throws the water out (it's above the water level) now the water doesnt go thru that. Does it mean something something bad happened?? what does it do anyway

 

[Bills86e]

It wants the cooling system hose connections opened, wired out & air-chucked
clear of debris, before it will spit Happy Juice again!

http://fiche.worldofpowersports.com/wps/Seadoo_OEM/Seadoo_PWC.asp?Type=18&A=75&B=13&Action=O

 

[tryku23]

thanks . is it easy to do it?? where should I start ??

 

[tryku23]

or if it's too complicated how much could it cost to do ?? could I just try to blow some air thru the bleed outlet with the compressor hose?? maybe that would help

 

[Turbo6990]

Little squirter

Screw in a garden hose at the rear of the machine, by the impeller outlet, top left. Turn on the hose slow aqnd then turn up till water blows clear. If it does not then you're gonna have to blow the mud out.

 

[Bills86e]

The engine is needed to be running to direct cooling water out exhaust, otherwise
the water would enter the lower case and ruin the crank. Trust me.:cheers: