• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

2000 RX 951 carbed wont rev past 6700

Status
Not open for further replies.

Olive

Member
As the title says it just wont rev past 6700.
Is this normal for a 951 RX or should it rev higher ?
Rave valves clean,Carbies rebuilt. New water regulator
New fuel lines, Standard impellor. Compression 125 in each pot ,25 hrs since complete rebuild
Runs like a dream and gets there Quick but peaks out at 6700 rpm.
Any information muchly appreciated
Thanks in advance for your help
Cheers Olive
 
I was going to say certain aftermarket impellers will cause that but you say you have a stock impeller. Check the pump/intake grate area to make sure everything is tiptop.
 
I also own a 2000 RX and I remember about 5-7 years ago it would rev all the way up to 7200. But after not using it for 4 years. The highest it will rev to is also about 6880. I'm also completely stock with 130 hours on it.
 
Status
Not open for further replies.
Back
Top