2000 GTX Won't Start After Carb Rebuild???

[brockb541]

I changed the gray fuel lines and cleaned the carbs and was still having the bogging issues so I rebuilt the carbs and now it will not start. What did I do?

 

[timmyboy76]

what did you replace, when rebuilding the carbs? Did you use "mikuni" parts?

 

[kustomkarl]

Your only choice is to pull the carbs apart and go back over what you did. Do 1 at a time and be sure all the diaphragms are ok and the hoses are hooked up correctly.

If you have questions while you in the midst of it, give us a shout, and we'll help out as best as we can.

Karl

 

[brockb541]

I will pull them again tonight. Would it make a differance if i put the sring that came with the kit or put the original ones back in? I used the sbt kits.

 

[timmyboy76]

yup..you either raised the pop-off or lowered it, depend'n on what color spring you used. Also, i think sbt kit, isnt original mikuni parts?..that be another problem.