2000 gti carb re-install

[Mdibon]

Hey everyone. Here is my issue. I had to remove the carb to have it rebuilt. The issue I have is that the oil wire. I unscrewed it from the carb. But how it was sitting under the motor (where it controls the oil flow) the connecter that sits at the end.of the wire has come out of position. I have no reference as.to how that should go back in. The picture that is attached is before it came out.

 

[mikidymac]

That picture is correct, the other end threads into the carb throttle lever.

 

[Mdibon]

Thanks. That picture was before I removed the carb. I was very lost until I used a mirror and realized that the had flipped all the way around. Once I was able.to pull the arm down I was able to use the mirror and re-seat the connecter. Thanks for getting back to me. Btw... working in a mirror is not easy....