1st time in the ocean Sunday

[jeepmiller09]

I have looked up and found some video's on youtube and was unable to find information on here. I am taking the Jet ski to the ocean on sunday. I bought salt terminator for the ski for after. I understand you need to flush the jet out with it for about 4 mins and then flush the hull out too with the salt terminator. How soon do you need to flush it all out because the ocean is about an hour away from me. Anything else i need to do?


Thanks,
Miller

 

[ocod]

You'll be fine.
But don't run it on the hose that long.
Start engine first then water. Reverse to shut off.

Make sure not to soak electronics.

 

[jeepmiller09]

I noticed where that the part you attach the hose to is to short to attach to the jet ski do you just get a poney section of hose to attach to the end of it and then attach it to the jet ski?

 

[ocod]

I noticed where that the part you attach the hose to is to short to attach to the jet ski do you just get a poney section of hose to attach to the end of it and then attach it to the jet ski?

No idea.
Check with you manual.

 

[murray5p]

Go to your hardware store and pick up a 1"Male hose barb to 1"NPT Female fitting, a 6"X1" galvanized pipe nipple,and a 1"Female hose barb to 1" NPT Female Fitting, put together and you have and extension .

 

[jeepmiller09]

Go to your hardware store and pick up a 1"Male hose barb to 1"NPT Female fitting, a 6"X1" galvanized pipe nipple,and a 1"Female hose barb to 1" NPT Female Fitting, put together and you have and extension .

would you like fries with that lol

 

[Duane72]

We bought the quick disconnects for hoses. Screwed the open male end on the flush inlet on the seadoo. Don't use the type of disconnects that have valves built in. You want flow even when you uncouple it. Use the female end on the hose. It's really easy to reach in and connect them that way and you don't have to fit a bunch of extra connections/pipes. Plus if you get the femal end with an on/off valve you can have the water supply on and ready at the seadoo and not have to run back and forth to the spigot.

This is actually exactly like the set I bought. And it comes with two male ends so you can just leave them installed on two different skis and use the hose for either one. http://www.ebay.com/itm/SEADOO-FLUS..._Watercraft_Parts&vxp=mtr&hash=item20c7ebd5f6