• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1999 Sportster HELP!!!!

Status
Not open for further replies.

99Doo

New Member
hey all I am new to this forum however have owned my boat for 6yrs. I took it out this weekend and everything went fine until I tried to start the port engine. Nothing would happen, not even a click. From reading around a little it could be a selenoid or fuse. My 1st question is, are both starters on the same fuse or are they seperate? If it is not the fuse does this diagnosis of a selenoid sound about right based on the symptoms I am experiencing? I am really frusterated and would appreciate any guidence or assistance. :thumbsup:
 
Check connections to solenoid/relay; I had this same prob couple weeks back. From tooling around in the lake the yellow wire to soloenoid became loose and fell off. I would start by checking that first for sure. I'm not totally familiar with your boat but I would assume its very similar to mine. The soloenoid/relay is inside the black boxes that have your red battery lead cables going to it.

Hope this helps.
 
Check connections to solenoid/relay; I had this same prob couple weeks back. From tooling around in the lake the yellow wire to soloenoid became loose and fell off. I would start by checking that first for sure. I'm not totally familiar with your boat but I would assume its very similar to mine. The soloenoid/relay is inside the black boxes that have your red battery lead cables going to it.

Hope this helps.

thank you I will try it this weekend....its 101 here and to dang hot to do anything
 
Status
Not open for further replies.
Back
Top