1999 GTX RFI

[JoeRJGR]

Greetings!

Just picked up a 1999 GTX RFI, with 63 hours on it. It had been sitting for 3 years. Couple questions in regard to maintence items I should do before I put it in the water.

1. I already changed the battery, and did a compression check. 150 PSI in both Cylinders. Fired it up and seems to run fine.
2. I ordered oil and the appropriate gaskets to do the jet drive pump oil

I want to do the oil and fuel lines, but am not sue of the sizes and amount required. Also, not sure how to bleed the oil. I assume its in the shop manual I have, but cant find the hose sizes.

Anything else I should look at doing prior to putting it in the water?

Thanks for the post and the advice!

 

[mikidymac]

1. New BR8ES spark plugs.
2. Drain all the old fuel and change the two in-tank fuel filters and install fresh gas.
3. No fuel lines to change on an injected ski.
4. No oil lines to change except the small 3/32" ones from the oil pump to the intake manifold.
5. Change the inline oil filter.
6. Verify you are using the correct API-TC full synthetic injection oil.