This is my first post so bear with me.
Ski sat for two years.
Compression is great both cylinders.
Replaced all fuel lines.
Cleaned out the tank.
Replaced Fuel selector valve.
Rebuilt carb.
New plugs.
Now ski will start only with the choke engaged and will die after about 10 seconds of running.
Fuel is flowing.
Went thru all vacumn tests, pop off etc. everything checks out ok.
Reset Needle and seat and nothing changes.
I'm officially lost.
Any ideas.
Ski sat for two years.
Compression is great both cylinders.
Replaced all fuel lines.
Cleaned out the tank.
Replaced Fuel selector valve.
Rebuilt carb.
New plugs.
Now ski will start only with the choke engaged and will die after about 10 seconds of running.
Fuel is flowing.
Went thru all vacumn tests, pop off etc. everything checks out ok.
Reset Needle and seat and nothing changes.
I'm officially lost.
Any ideas.