1996 SPX - press on VTS button and gauges reset?

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Crazy685

Member
So, had an issue where spark was lost. Replaced my CDI and it fired right up and all seemed well. That was, until i hit the vts button.

when you press it up, the gauges reset and almost act like an on off switch. The moment i release the vts switch up button, gauge dies again.

now the ski won’t start! I get no power.

im so confused. Did my VTS short circuit and disrupt everything?
 
It’s pretty common on your generation for a bad VTS unit to short out things including the MPEM.

I would unplug both connections from the VTS, check for blown fuses and retest.
 
Status
Not open for further replies.
Back
Top