1996 Seadoo SPX. Vts not working

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

pkowall

New Member
I have a 1996 seadoo SPX. The vts system isn’t working. The motor it’s self is definitely pooched. Everything I’ve seen online they are saying it’s the module. The 7.5aml fuse was blown, and when I replaced it it’s keeps blowing again. So is that mean the module in the grey box is no good, or the module at the back of the ski that the motor attaches too

Any help on this would be awesome
 

Attachments

  • B8B29F1D-A238-4710-B38D-75B41B359A6E.jpeg
    B8B29F1D-A238-4710-B38D-75B41B359A6E.jpeg
    404.1 KB · Views: 3
  • B8E26A80-939F-4BEE-8401-126A339F27E2.jpeg
    B8E26A80-939F-4BEE-8401-126A339F27E2.jpeg
    405.2 KB · Views: 3
Run 12 volts directly to the motor to rule out or rule it in,,,usually...its the module.
 
Its he large black cubical behind the motor,,,over time,,,water seaps into the module and corrodes the circuit board within,
 
Status
Not open for further replies.
Back
Top