1995 Sea-Doo SPi

[TheGreatNickC]

I need help with my Sea-doo! I changed the fuel lines, Cleaned out carburator, changed the battery. It ran fine for a day. The next week took it out again and when I hit the start button it does an initial click to start but doesn't turnover. Sometimes it sounds like it tries but never starts. Please help!

 

[NickCawks]

You should start by multimetering your battery even new ones can be bad on arrival. Next I'd suggest checking the battery cables. They tend to rot from inside out so they look fine but aren't.

There are a couple other things that could be the issue here as well. Remove the PTO cover and see if you can turn the PTO by hand. If you can and the battery and cables come back good remove the spark plugs and see if it turns over. If it does, does it spit water or oil out the holes? i

Those are the easy first steps. Hopefully you can find out it's something simple like that. If not report back and we can get deeper into diagnostic options.

 

[TheGreatNickC]

Thanks for the help I'll let you know when I get the chance to check those things. Thank you for your response