• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1 beep during start sequence

Status
Not open for further replies.

Jim Brown

Active Member
I have a 2011 RXT 260 and am only getting 1 beep after pressing the Red start/stop button. The ski will not start. The battery is new and all connections are secure. Any assistance would be appreciated.
 
Do you get any codes, it will scroll across the screen if it a bad DESS port/key or something, you my have two different problems or use another doo key to see if you get a code and if no start check across the relay once you get 2 beeps with a volt meter, my 2nd Doo just started this late summer the same thing 1 beep, error code (same code) but it will start, my 1st Doo did same thing last year i replace with a new DESS key and now i get 2 beeps all the time now.
 
Thanks. I had no codes. Decided to remove all fiuses, clean fuse block with contact cleaner, clean each fuse blade with a fine file, and cleaned battery connections. Used dielectric grease on all of the above and re-assembled. Got 2 beeps and she started right up. Thanks for the reply. Cheers.
 
Status
Not open for further replies.
Back
Top