C cnabster New Member Aug 27, 2017 #1 I've replaced the plug, and coil but still no spark any suggestion on where to go next?
mkov608 Active Member Aug 27, 2017 #2 Check for continuity between the mpeg and the coil. Then do the same between the other coil wire to the ECU. If the wiring is good, chg the ECU. The schematic is in the service manual.
Check for continuity between the mpeg and the coil. Then do the same between the other coil wire to the ECU. If the wiring is good, chg the ECU. The schematic is in the service manual.
mkov608 Active Member Aug 27, 2017 #3 Before replacing the ECU, make sure you don't have a short to ground
