Recent content by Narcotics

Ah thats interesting. I do always spray inside the intake grate after riding. Would Yamalube do the same as XPS lube? I have yamalubed the engine to avoid corrosion... I found out a few days ago that seadoos come with an engine cover LOL... since this is my first ski I never knew.

The driveshaft was actually in perfect condition and the splines were as if they'd never been touched. Aren't they made to withstand corrosion? That's what it seems because there were literally only tiny salt/water spots on the shaft. As for the cone... we did end up taking it off just to check...

Hi, Just recently fixed my ski and was planning on working on it a bit more. I'm fairly new to this so please bare with me. (I have a 2012 GTI 155 SE - Exhaust schematic) I was planning on installing a cold air intake but couldn't seem to find a kit for my specific model (is the layout that...

Solution: After lots of messing around and sourcing information. (It's a very long story). We concluded that the new pump was faulty (but the fault seemed to be a common problem, as a guy in an SBT store told us). The impeller shaft (267000388) was set too far back when manufactured and...

Thanks for the reply. I've got 200hrs on the Sea Doo and I run in on a lift (to flush it) after every time I use it so I've heard the rattle. Today I went out and bought a torque wrench and an extension arm so I could reach the pump bolts (the four attached to the hull) and I loosened them and...

Hi, So the past month and a half has been quite an adventure for me... first time working on a JetSki (2012 SeaDoo GTI 155 SE) So heres the story: After breaking down at sea and discovering the pump seals had given and the entire pump housing was corroded, I had no choice but to replace...