Recent content by Matt Braley

I have another one of these for sale now.

I did last night. The 50 includes shipping.

Yes the purple ones in the package

Yes the purple new ones

Jetting should be around 75 lows and highs should be 150 mag, 152.5 pro at least. 2 things I’m not hearing..... initial timing with the Enhancer and squish measurement.

OK I'll PM you my Paypal

I have a good used one for $100 shipped

Sounds like a solid plan especially if you can get them for around 400. You will need an aftermarket or ported stock intake manifold and you will need to jet and set the pop off to whatever setup that you end up with. I agree that you should leave it stock until your putting all the other...

Yes how many would you like?

A lot of good info up there PnB. I say buy a 35 dollar TTO tach or a 50 dollar Tiny Tach. That shows rpm as the engine runs and only requires wrapping a wire around a plug wire a couple of times. They also count engine hours and display them when the engine is not running. Now you can go play...

Wiseco pistons require a little more clearance. Even then the engine needs to be warmed up pretty good before you hammer on it. The engine probably failed because it required race fuel. The damage you see is called detonation.

No sorry. I have a couple 717 builds coming up and then I'll sell what;s left.

There is no Spec 1 and Spec 2 in 717 pipes, only 787 pipes. The early chambers of 717 pipes were recalled back in the day because they blew up engines regardless of what you did. Obviously I can't tell from here if that's 34 or 38mm. I can tell the support bracket that mounts to the flywheel...

The price is not bad really. people race those and pay 5-6K for race ready boats with all the issues worked out. Some of the sellers Skat stuff does not add up. I've never heard of a 145mm pump just 140, 142, 144, and 148. Is it a rebuilt Skat pump or just a stock pump with a Skat impeller? The...

A lot of the work of that conversion is adapting the 155mm pump to the 140mm hole. If they left the stock pump in there then it would have trouble using the power.