Recent content by bwhite

This is exactly what I was hoping to find! Just might be useful for us, and a little safer than docking the ski's. This is only something to keep them secured while we are nearby, and not a long-term storage option. Also figured I'd mention the section of dock I displayed has at least 4' water...

A little back story. We have some land on a freshwater lake in Northern Florida. We would only keep these in the water overnight and any time we leave them overnight we check the hull for leaks after ~30 minutes of being docked minimum. Its not long term storage, rather garage kept since we...

I've been thinking about docking our pair of 2013 GTI's at the lake. My only concern is it can be somewhat rough at times. In the past we have attached the bow by rope to one of our dock posts and the tow hook to a cinder block anchored at a diagonal away from the dock. (See my profile picture...

Swapped out the plugs. Seems to run pretty smooth on the hose now. Will have to wait until we splash them again in a couple of weeks to see how they run in the water.

The plug was black and dry, granted I let the engine cool before I pulled the plugs. Would it be worth adding seafoam to the fuel to clean the cylinder heads and injection system?

This is what I found after pulling the plugs. Left to right cylinder 3 to 1. Cylinder 2 seems fouled. I'm curious on a root cause for this, though. Should I be concerned? I'm pretty sure the ignition coils were snug and the harnesses were attached. Next thing to check will probably be fuses.

My family decided to take the first trip to the Lake of this season this weekend. It seems one of our 2013 GTI (Model 23DC) is running a little rough while the other runs fantastic. They have right around 60 hours on them. Yes, they did sit over the winter with ethanol free fuel about 1/4 tank...

Never used, purchased years back in case the fuel filter assembly ever cracked when replacing the fuel filter in a '95 Seadoo XP. Never needed to use it. Will take best offer. Part Number 275500088

Not sure the best price for this, but it seems I paid ~ $8 for this + shipping. Ended up selling the ski before we put it on. Never opened.

Not sure the best price for something like this. Seems like I only paid ~$15 + shipping for it a bit back. Ended up selling the ski before we put it on. Never opened factory XP hood decal. Part # 219900463

Is it possible the driveshaft splines are worn from debris? Does the engine rev high when it's maxing out at 8-9 km/h? If it revs high, it may be cavitating. I'm curious what the dealer determined. Keep us posted!

Hi all! I have a 2013 GTI 130 (23DC) that I was swapping the battery out on. I seem to have lost the hex screws that bolt the electrical support module onto the battery support. Could anyone help me determine the size of these bolts? It seems like it was fairly small (6mm or so) but I'm...

Thanks for all the replies. I'll give this new 60' rope a go and see if it's about right. Also just bought a wakeboard... Stoked to give that a try as well.

After upgrading from the '95 XP to the '13 GTI 130 I've noticed the tail from the jet pump is much more aggressive for tubers. We had a 50' rope but now riders get sprayed right in the face. I've just purchased the longest tow rope I could find (60'). Does anyone else with the same model know...

Well, we got some adhesive and managed to pull the old ride plate off. Now, the ski manual does call for removing the jet pump and using a bottle jack/steel plates. All we had to use was a few small crowbars, razor blade, putty knife and some rags (to keep from scratching the hull). We did not...