Search results

Took my ski to the lake today after fresh rebuild, purring and ran really good, but only rode it for a few minutes because there was a big water leak coming from the exhaust manifold. I don’t know why. It came from the bottom and water was just running out of there, could there be a way where I...

how would I get those raves down and how would I know how much. It’s not a cylinder exchange from SBT, I had no core.

I just got a 1996 Seadoo xp top end rebuild kit with new cylinders and wsm pistons. What’s the ideal break in process and fuel mixture. I am running premix as the oil injection is deleted. Also, how are the WSM top ends? Mine is 0.5 over, carb was running good when it was stock at 82mm, should I...

I am going to unplug the temp sensor now that you say that and let you know if it worked😂

I tried a backup post so it must be the key

It goes right back into beeping once saying that it’s not the key which it is

No, it’s getting 2 short beeps for the diagnostic saying that is it the key since the wires are good. Why would the key just not work after sitting for some time?

Did that and got the 2 short beeps. The key can’t be defective because it detects my other key and the wrong one. I checked all of the wiring and it all seems to be in place

Woke up today to take my 1996 xp to the lake. Battery was dead so I took it out and replaced it with another one(also dead at the time but didn’t know, lost its charge) put the key on and nothing. Charged up the old one and put it in. Electrical turns on, but it’s not registering my key. Tried...

I have something a lot of you seadoo 2 stroke lovers may want. They are a bunch of T-shirts and tank tops that have design of skis on them such as XP’s, SPX’s, HX’s etc. and for right now use code “Seadoo” for 10% off UNTIL TONIGHT AT 12 AM eastern Sea Tops <<<link

Took my 96 XP out to the lake today. Everything was spotless. I even took before pictures got back, but it sit with the seat off for a hour or 2 and I come back to this. What is it and how do I get rid of it?

Because I can't fit the plugs through those watertight o rings

I am converting to single gate should cover, and I am taking off my triple gauge with mirrors (stock). I don’t know where I should cut the wires that go from the gauges to the E box. Since obviously, I’m not going to be able to fit the wires back through. Should I cut them around where the whole...

I want to replace the stock 1996 Sea-Doo XP hood cover with a single gauge hood cover. Where the gauges meet the other wires that go to the E box can I just snip the wire? Could I just cut where it is circled in the photo.

I have a 1996 seadoo xp that has the rave on the water box and on my modded ski, it is removed. How would I remove it permanently?

Got a 1996 seadoo xp and it keeps on fouling plugs. I know it should not be doing that. My guess is that I am running a bad mixture(over 50:1). What would be the best mixture that I should run?

I have to for racing. In order to race for the AJSA Summer series. i have to have oil injection deleted

Thanks a lot. I’ve been worrying because of the different psi. I thought it would wear off. I have another question. I recently did an oil block off and idk if I have to take the oil pump shaft out. That’s the little plastic peice. People say to take it out but mines in there and ain’t coming...

I went outto my ski today since I got 175 psi in the exhaust side and 155 psi in the driveshaft side.I looked inside the cyl and saw it was a bunch of carbon build up.Got this ski a couple weeks agoand it has not been ridinsince 1997. I took it out to the lake a couple days ago and it was...